NUNN FIRE TRUCK FENDER REPAIR
SVI Refurb was called upon to repair this Nunn Fire Department fire truck after it sustained rear fender, side door and rub rail damages in an accident. After a thorough inspection, it was determined the damaged components would need to be re-built or replaced. Below shows this apparatus' fire truck repair process.
CURBSIDE REAR FENDER / COMPARTMENT DAMAGE
LEFT SIDE OF FENDER / COMPARTMENT DAMAGE
RIGHT SIDE OF FENDER DAMAGE
INSIDE OF COMPARTMENT DAMAGE
THE REPAIR PROCESS
First in the fire truck repair process, the damaged areas are removed. Following removal, measurements are made and fresh metal is cut and fabricated to specifications. The new pieces are then welded into place and the area is prepped and masked off for paint. The result — a truck repaired to pre-damage condition and ready to serve the community again.
DAMAGED AREAS ARE REMOVED
PIECES ARE WELDED INTO PLACE
ENTIRE AREA IS BLOCKED, SANDED, MASKED AND PRIMED
NEW PIECES ARE FABRICATED
WELDS ARE GROUND DOWN
NEW PAINT IS APPLIED